Dry-it-out damp remover and damp preventer

CASTLESEAL "DRY-IT-OUT" DAMP REMOVER

DRY-IT-OUT is a technically advanced damp removal system, which will effectively dry out any wet porous building material. Normal damp proofing materials are effective only on dry surfaces however DRY-IT-OUT uses a special formulation which locates and removes water from the pores of the substrate.

DRY-IT-OUT applied to half of a damp paving slab shows how the water is displaced

After one application of DRY-IT-OUT substrates are completely dry and sealed against further water penetration. One coat will form a virtually invisible protection to most surfaces however two coats may produce a slight sheen.

DRY-IT-OUT is economical to use and permanent. Use it on any porous building material, indoors or out: brick, stone, concrete, blockwork, paving slabs, plaster, gypsum, hardboard, MDF and wood.

DRY-IT-OUT comes in 7.5 litre kits, sufficient for over 100 m² (one coat).

Apply by pump-up sprayer, roller or brush. For spraying, the Castleseal ''Sure Shot'' sprayer is recommended.

After curing, DRY-IT-OUT is a fully weatherproof system however treated surfaces may also be rendered, over-plastered, wallpapered or painted with any conventional paint.

TRY-IT-OUT & DRY-IT-OUT!

FAQ'S

ORDER FORM FOR D.I.Y. PACK (U.K. ONLY)

VISITOR NUMBER

View Counter Stats

^{Damp remover, damp preventer, porous stone, porous bricks, plaster, wood, MDF, chipboard and hardboard
Damp remover, damp preventer, porous stone, porous bricks, plaster, wood, MDF, chipboard and hardboard

Damp remover, damp preventer, porous stone, porous bricks, plaster, wood, MDF, chipboard and hardboard}